Aerial Lift Safety Tips for Aerial Work Platform Operators

aerial lift

Aerial lifts make your job much easier through their mobility and flexibility but they also represent many safety risk. According to the investigations of aerial lift safety conducted by the occupational safety and health administration (OSHA), the leading causes of aerial lift deaths are falls, electrocautions and collapses or tip overs. Aerial lift equipment face a myriad of safety issues both overhead and on the ground, as well as the challenge of conducting their work high in the air on somewhat small operating platforms. Both the equipment and personal safety challenges are elevated due to it.

What should be the leading priority for aerial equipment manufacturers?

The number 1 priority for aerial equipment manufacturers is to provide safe, productive aerial work platforms for the customers working on aerial worksites.

Aerial lift safety tips for Aerial work platform operators

Operators should know and follow these tips as a minimum for safe work practices. Thus the best methods to reduce the risk of incidents from happening while operating in an aerial platform on a job site are.

Training

It’s essential for the operators to receive a proper training both general and hands on. The operator must be familiarized with the product on which he is operating. The safety training and consulting services have opened their health and safety training centers in Highland, Indiana to provide training classes up to standards provided by osha front end loader training.

Keep the distance from the power lines and wires

Electrocautions are amongst the three top most frequent causes of injury or death with aerial lift. Power lines, wires and other conductors should be treated as they are the live wires, even if they appear insulated. One should keep an expense of at least ten feet or three meters from the power lines at all the times.

Maintain a distance between the scissor lift and other equipment

Wind is not the only cause which causes a scissor lift to tip over but it’s the other equipment which are the main culprit. Make sure that scissor lift is out of the way of other equipment. Working in tight quarters can also be inconvenient but it’s worth to avoid the risk of equipment bumping into the scissor lift ,causing it to tip over.

Beware of collapsing

Scissors lifts can be unstable in another way. There are high chances of collapsing in Scissor lifts. Although there are safety features which prevent them from collapsing and those features should be tested and maintained. Maintaining a safety feature could give you an ability to move the piece of equipment more quickly and conveniently.

Avoid windy weather

Make sure to check the weather outside before handling a scissor lift. As the scissor lift is very tall and slender in an elevated position so one should avoid using it in the windy weather. It may take a lot of your time to push the scissor lift over.

So, the workers have to be careful as there is a decline in the population of the workers using aerial lifts. Workers using aerial lifts are injured or killed if they don’t know how to operate them safely. According to the Center for Construction Research and Training, also known as CPWR, about 26 workers die every year using aerial lifts. The cause many range from electrocautions, falls to tip overs being caught between the bucket. But maintenance of the machinery and care of the rental equipment is our prime priority to prevent these causes. So go ahead and follow these steps to prevent injuries and sudden happenings.

Related posts

Leave a Comment